Philips X-tremeUltinon LED gen2 11065XURX2 car signalling bulb

A Philips X-tremeUltinon LED gen2 car signalling bulb from the brand Philips is designed for use in vehicles. It operates at an input voltage of either 12V or 24V and has a power consumption of 2.1 W. The fitting/cap type is specified as W21W, while its base type is designated as W3x16d, indicating it can be installed using these specific types of sockets commonly found in automotive applications.

The bulb’s light color temperature is set at 6000 K, providing bright, white light that enhances visibility during nighttime driving. This particular model emits a luminous flux of 100 lumens, which should ensure adequate illumination without excessive heat generation due to high brightness levels. Despite being classified under the category of ‘LED’, this product does not meet European Economic Community (ECE) regulations; however, it still offers advantages such as long-lasting performance up to twelve years based on typical usage scenarios.

With dimensions measuring approximately 15.1 x 8.5 x 19.5 millimeters when packaged together, each individual bulb weighs around 13 grams net but increases slightly upon packaging reaching nearly forty-four grams gross per piece. These bulbs are sold individually rather than in bulk packs larger than two units unless otherwise ordered specifically by customers looking for quantity discounts typically offered starting from twenty pieces minimum purchase requirement noted above.

Notable features

• Model: Philips X-tremeUltinon LED gen2 11065XURX2 car signalling bulb
• Dimensions (W×D×H): 15.1 x 8.5 x 19.5 mm
• Width: 151 mm
• Height: 85 mm
• Package weight: 0.62 g
• Input voltage: 12/24 V
• Light colour: Red
• Colour temperature: 6000 K