Hypertec 256MB PC100 (Legacy) memory module 0.25 GB 1 x 0.25 GB SDR SDRAM

To provide you with an accurate understanding of our Hypertec 256MB PC100 (Legacy) memory module, we have listed its key specifications below:
This memory module is designed for legacy systems that require specific compatibility standards. It features internal memory capacity of 0.25 GB in a single slot configuration.

The memory modules are constructed using Single Data Rate (SDR) Synchronous Dynamic Random Access Memory (SRAM), which operates at a speed of PC100. They utilize a standard 168-pin Dual Inline Memory Module (DIMM) form factor to ensure easy installation into compatible motherboards. The module does not support Error Correction Code (ECC) functionality; it is classified as registered but buffered rather than fully buffered.

This means it offers some level of data integrity protection through error detection capabilities without requiring additional buffer registers on each chip compared to fully buffered types. However, this may result in slightly lower performance due to potential delays associated with these extra steps during read/write operations between the CPU cache line and main DRAM array itself.

Product highlights

• Model: Hypertec 256MB PC100 (Legacy) memory module 0.25 GB 1 x 0.25 GB SDR SDRAM
• sku: HYMFI21256
• Internal memory: 0.25 GB
• Memory layout (modules x size): 1 x 0.25 GB
• Internal memory type: SDR SDRAM
• Memory form factor: 168-pin DIMM
• ECC: No
• Buffered memory type: Registered (buffered)